新闻banner
Your current location: Home >> News >> COMPANY NEWS

ContactContact Us

Wuxi Yunda Machinery Co., Ltd

TEL:+86-0510-83090613

E-MAIL:sales@ydmac.com

Web:www.ydmac.com

Jiangyin:320 South of Jiangyang Rd.,Qingyang Town,JiangyinCity,Jiangsu,China, 214401

Wuxi:16 / F, United Financial Building, No.8, financial 8th Street, Binhu District, Wuxi City, Jiangsu

Indonesia Office:Rukan Exclusive Block H No.21 pantai Indah Kapuk,Jakarta Utara.

New quay cranes will have a certain running in period

2020-09-09 09:48:15
a

Generally speaking, the newly bought crane will have running in period, and there will be some problems which affect the normal operation. Yunda Xiaobian has sorted out some characteristics of running in period, which can better use the equipment. The port crane manufacturer will accompany us to have a look.

1. Wear faster

Due to the influence of processing, equipment and adjustment of new crane machine parts, the conflict appearance is rough, the contact area of cooperation surface is small, and the pressure bearing condition of appearance is uneven. During the operation of the equipment, the concave and convex parts on the surface of the parts collide with each other, and the metal debris grinded down as abrasive will increase the conflict and accelerate the wear of the cooperative surface of the parts. Therefore, during the running in period, the wear of parts and components is short, and the wear speed is fast, so we should pay attention to the maintenance at ordinary times.

2. Poor lubrication

Because the spare parts of the new equipment have small cooperative space, and because of the equipment and other reasons, it is difficult to ensure the uniformity of the cooperation space. The lubricating oil is not easy to form a uniform oil film on the surface of the conflict to prevent wear. Then, the lubrication efficiency is decreased, and the abnormal wear of the machine parts in the early stage is formed.

3. Loose parts

In the initial stage of application, due to the impact, vibration and other alternating loads, as well as heating, deformation and other factors, coupled with the rapid wear and other reasons, the original fastening parts are slightly loosened. And parts loose will form leakage phenomenon, such as oil leakage.

For newly purchased cranes, some of them are not familiar with the local area. Perhaps the operation is not easy, which may cause some mistakes. New operators are more likely to have these simple problems. Therefore, the new mechanical equipment should be familiar with first, after the running in period, it will be formally put into use.


The label

0
The last: None

NATIONAL SERVICE HOTLINE

+86-0510-83090613